煤粉仓CO一氧化碳在线监测系统 TK-2000 coal powder CO on-line monitoring system
I. System Overview
The CO carbon monoxide on-line monitoring system of the pulverized coal warehouse mainly makes early warning for the fire alarm inside the coal mill and the coal storage warehouse. Shandong Xinze Instrument Co., Ltd.'s design idea is to monitor the CO concentration value produced by coal burning.
The system draws in the CO gas in the coal mill or the pulverized coal bin through the sampling probe through the imported sampling pump, and then the sample gas is pretreated, and the S2000 infrared CO analyzer is used to complete the detection of the CO gas concentration. Any increase in CO concentration is a sign of early fire alarms and the system can make a corresponding alarm.
TK-2000 complete set of device consists of seven parts: sampling, back purge, gas sample pretreatment, gas sample analysis, instrument calibration, program control and signal output. The complete set is controlled by PLC. The complete set of services includes design, supply, technical training and on-site commissioning according to the user's working conditions and requirements. It is an effective means for industrial process monitoring, safety production and environmental protection.
★ The sampling probe is maintenance-free. The innovative design of Xinze Company and the innovative filtering principle solve the clogging problem. Soot filtration capacity is less than 200g / NM 3 and maintenance is small.
★ System response time <10S, instrument response time <1.5S, large suction pump flow (6L / min), system response time <10S is the fastest among similar products in China. Effectively guide production safety.
★ System filtration accuracy≤0.1μm
★ System reliability MTBF ＞ 3 years
★ The product is cost-effective, and one system can realize multi-component simultaneous online detection.
★ The system is completely dry filtering, the sampling is not distorted, and the analysis is accurate.
★ Fully automated system with completely unmanned management.
★ The calorific value is displayed visually, and the calorific value changes are observed from time to time.
★ Real-time monitoring, fully automatic touch screen control, truly real-time monitoring 24 hours a day.
Third, the main technical parameters of the system
(1) Measuring range: (optional component) (optional range);
(2) Maximum allowable error: ± 0.1% FS;
(3) Resolution: 0.01%;
(4) Stability: zero drift ± 1% FS / 7d;
Range drift ± 1% FS / 7d;
(5) Repeatability: 0.1%;
(6) Preheating time: 10min;
(7) Sample gas flow: (0.3 ～ 0.5) L / min;
(8) Sample gas connection size: G1 / 2;
(9) Electrical interface size: 1 / 2NPT;
(10) Working power: AC220V ± 10%, 50HZ;
(11) Working environment: temperature －5 ℃ ～ + 45 ℃;
Humidity ≤90% RH;
(12) Explosion-proof grade: ExdIICT6; (optionally explosion-proof)
(13) Analog output: 4-20mA;
(14) Sample gas pressure: 0.05MPa≤inlet pressure≤0.1Mpa.
4. Applicable working conditions
★ Flue gas dust content: ≤2000g / Nm3
★ Gas sample temperature: ≤400 ° C
★ Extreme gas sample pressure: -lOOhpa
★ Anti-bite scavenging: 0.6MPa, oil-free, running water, dust-free air
★ Air consumption: 5Nm3 / H